Online Catalogue | Lead Moulds | Sea Fishing Moulds
Quantity:
This mould makes breakout/breakaway type leads for beachcasting and uptide fishing, and is based on the DCA Moulds gripaway mould that is now no longer available. The tails, wires and rollers used in the illustrations need to be purchased separately. Pack contains:1 x rollergrip lead mould (pre-drilled for side grips) 2 x plastic tubes to assist in getting the 'bend' in the right place for the gripwires. 2 x wires for forming the holes for the gripwires to go throughA full range of tail wires, gripwires and rollers are available for this mould.All moulds come with full operating and safety instructions . Related products:
Similar to the now unavailable DCA bo-pedo mould, the quick drop mould is the most popular style of lead for general boat fishing. The mould takes the quick drop loops (supplied separately) as illustrated. Available in sizes from 8oz (1/2lb) to 24oz ( 1 1/2 lb) Related products:
3 sizes available - 12, 16 and 20 oz (3/4lb, 1 lb and 1.25lb approx) The lead gill pirk mould is a great fish shaped lure for those big cod over wrecks. They can be coated with our range of powder coatings or decorated with the holographic 'catch faster stripes' for added attraction. They can be used with the steel connectors as standard or, fitted with a rigid plastic tube for 'in-line' style fishing where the lure can slide on the line, see the related products below. Each lead gill mould comes with 5 steel connectors and full instructions. Related products:
Norwegian style pirk mould. 3 sizes available - 12, 16 and 20 oz (3/4lb, 1 lb and 1.25lb approx) All moulds come with 5 connectors and operating instructions. Once cast these pirks can be slighty bent to add to the vibration/attraction when jigging them. Designed for deep water wrecking for big Cod, Ling, Pollock etc, they can be 'dressed off' with muppets and can also be coated for added attraction with out range of Coat n' Catch Powders. Related products:
280grms (10oz approx) Brilliant jigging mould jigging/ wrecking. Dress the hook with muppets, curl tails or shads for that extra attraction and watch the tip go round! Pack contents: 1 x mr.big-jig mould 10 x 5/0 jig hooksAll moulds come with full operating and safety instructions . Also see our coat n catch powders and 3-d eye catchers for lure making inspiration! Related products:
Fish-face jig mould, makes jig heads in: 25g/40g/70g/100g (1oz,1.4oz, 2.5oz and 3.5oz approx) Each size can be cast individually, all moulds come with full operating and safety instructions. (hooks shown are for illustration purposes only and are not included)Brilliant for cod, pollock, bass and pike too! Hooks can be dressed in muppets,shads,curl tails for extra tip bending attraction! Also look at the coat n catch powder and 3-d eye catchers for extra ways to add attraction! Related products:
This 2 in 1 mould makes jigs of 125grms and 150grms (4.4oz and 5.25oz approx) Each size can be cast individually, all moulds come with full operating and safety instructions. (hooks shown are for illustration purposes only and are not included)Brilliant for cod, pollock, bass and pike too! Hooks can be dressed in muppets,shads,curl tails for extra tip bending attraction! Also look at the coat n catch powder and 3-d eye catchers for extra ways to add attraction! Related products:
Designed as a sea lure mould it is used for bass, pollock, and cod but now has a large following with the pike anglers too as an excellent pike jigging lure. Casts jig heads from 14 to 45grms. kit includes :1 x mould, 10 x jig hooks (3/0), 5 x 100mm twin tailsAlso look at the coat n catch powder and 3-d eye catchers for extra ways to add attraction! Related products:
This is the newest addition to the cannon ball lead moulds range. It produces both 6oz and 8 oz leads and each size can be made individually. Ideal as a boat fishing lead as they have a very low centre of gravity, the smaller sizes can also be used off the rocks with a suitable rod. Uses standard stainless or brass loops available separately. All moulds come with full operating and safety instructions. Related products:
This is the new cannon ball lead mould, gaining popularity at the moment and a lot of write ups! Ideal as a boat fishing lead as they have a very low centre of gravity, the smaller 10 oz size can also be used off the rocks with a suitable rod. Uses standard stainless or brass loops available separately. All moulds come with full operating and safety instructions. Available in four sizes. Related products:
Twin cavity mould for making 5 & 6 ounce distance casting leads (without gripwires). For sea fishing and extreme range carp fishing. All moulds come with full operating and safety instructions. These moulds take a loop or loop and swivel, not included but shown in pictures for illustration purposes. Related products:
10 oz mould for uptiding/ boatcasting. Also has uses as a rock/ beach lead for very strong flows but must be used with a rod capable of handling it. The mould takes the rollergrip tail wires (eyes) at the top end, the 4 grip wires are then inserted at the back to make a lead that should handle the heaviest tides. Loops, swivels and wires are all sold separately but shown for illustration purposes. Related products:
Single cavity 6 oz mould for big floods and heavy flows (similar to a big gripper) an ideal lead for fishing rivers due to the shape that is designed to prevent rolling. As well as the 'nobbles' on the outside, the leads also have a hole in the middle that can be packed with groundbait/ paste etc for added attraction. Also see the 'watch lead' moulds as an alternative shape. Related products:
Also known as the doughnut lead due to the hole in the middle! Popular amongst sea anglers for years and now gaining popularity as a brilliant floodwater lead with barbel anglers due to the excellent gripping properties. Takes a brass loop and swivel (sold separately) leads can be cast individually. All moulds come with full operating and safety instructions. 110grm + 140grm (3.85 oz + 4.90 oz approx) 165grm + 205grm (5 3/4oz + 7 1/4 oz approx) Related products:
An essential item for any budding lead makers.Heavy duty sprung, faster than clamping a mould up in a vice and a lot less fiddly. A must have item for safe lead making
Items:, Value:
